H3C交换机配置链路聚合

操作方法

（01）# 创建聚合组1（根据具体情况选择下面两种方式之一）。l采用静态聚合模式：创建二层聚合接口1<SwitchA> system-view[SwitchA] interface bridge-aggregation 1[SwitchA-Bridge-Aggregation1] quitl采用动态聚合模式：创建二层聚合接口，并配置动态聚合模式<SwitchA> system-view[SwitchA] interface bridge-aggregation 1[SwitchA-Bridge-Aggregation1] link-aggregation mode dynamic# 将以太网端口GigabitEthernet1/0/1至GigabitEthernet1/0/3加入聚合组1。[SwitchA] interface GigabitEthernet 1/0/1[SwitchA-GigabitEthernet1/0/1] port link-aggregation group 1[SwitchA-GigabitEthernet1/0/1] interface GigabitEthernet 1/0/2[SwitchA-GigabitEthernet1/0/2] port link-aggregation group 1[SwitchA-GigabitEthernet1/0/2] interface GigabitEthernet 1/0/3[SwitchA-GigabitEthernet1/0/3] port link-aggregation group 1[SwitchA-GigabitEthernet1/0/3] quit# 配置二层聚合接口1所属VLAN，并将该配置批量下发到各成员端口上。[SwitchA] interface bridge-aggregation 1[SwitchA-Bridge-Aggregation1] port access vlan 20[SwitchA-Bridge-Aggregation1] quit# 显示配置信息。l采用静态聚合模式的链路聚合配置信息[SwitchA] display link-aggregation verboseLoadsharing Type: Shar -- Loadsharing, NonS -- Non-LoadsharingPort Status: S -- Selected, U -- UnselectedFlags:  A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,D -- Synchronization, E -- Collecting, F -- Distributing,G -- Defaulted, H -- ExpiredAggregation Interface: Bridge-Aggregation1Aggregation Mode: StaticLoadsharing Type: SharPort             Status    Oper-Key--------------------------------------------------------------------------------GE1/0/1         S         1GE1/0/2         S         1GE1/0/3         S         1结果说明：本端加入到静态聚合组内的成员端口都处于Selected状态，与对端对应端口是否是Selected状态无关。l采用动态聚合模式的链路聚合配置信息[SwitchA]display link-aggregation verboseLoadsharing Type: Shar -- Loadsharing, NonS -- Non-LoadsharingPort Status: S -- Selected, U -- UnselectedFlags:  A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,D -- Synchronization, E -- Collecting, F -- Distributing,G -- Defaulted, H -- ExpiredAggregation Interface: Bridge-Aggregation1Aggregation Mode: DynamicLoadsharing Type: SharSystem ID: 0x8000, 000f-e234-5678Local:Port             Status  Priority Oper-Key  Flag--------------------------------------------------------------------------------GE1/0/1          S       32768    1         {ACDEF}GE1/0/2          S       32768    1         {ACDEF}GE1/0/3          S       32768    1         {ACDEF}Remote:Actor            Partner Priority Oper-Key  SystemID               Flag--------------------------------------------------------------------------------GE1/0/1          17      32768    1         0x8000, 0000-fc00-6504 {ACDEF}GE1/0/2          18      32768    1         0x8000, 0000-fc00-6504 {ACDEF}GE1/0/3          19      32768    1         0x8000, 0000-fc00-6504 {ACDEF}